How To Clean Your Washer And Dryer

Exactly like your clothes, your washer and drier are things that require regular cleaning, although not that often. As time passes, washing machines collect detergent residue that might lead to mold, and dryers collect lint which may start a fire. So clean your washer and dryer regularly to keep them safe and fresh. 

How to Wash Your Washing Machine

  1. Run a bicycle with baking soda. Run the longest and hottest cycle with water and routine baking soda (without laundry). Add two cups of baking soda to the washing machine. This is going to combat moldy smells that old soap and fabric softeners leave behind.
  2. Run another cycle with white vinegar. To eliminate musty odors, as well as soap and fabric deposits, pour two cups of white vinegar right into the machine drum and operate the longest and hottest cycle. To get additional freshness, add 10 drops of essential oil, such as tea tree or lavender to the mixture.
  3. Clean the washing machine’s interior. Wipe down the drum and agitator (if you have one) with vinegar and a cotton cloth. Remove any stains using a paste of baking soda and water and a soft sponge.
  4. Clean the rubber seal attached to the washer when you have a front-load washer. It normally hosts mold which is bad for your health and your own clothes. Clean it with a cotton cloth dipped in white vinegar or your favorite all-purpose cleaner.
  5. Clean the outside machine components. Now it is time to provide your washer door, the exterior surfaces, in addition to the detergent dispensers a fantastic clean. If dispensers are removable, take them out. Use vinegar or your preferred cleaner and a cotton cloth. If you’ve got a top-load washer, clean the top of the lid and underneath it. For cracks and crevices, use a toothbrush and baking soda if necessary.

How to Wash Your Dryer

  1. First, remove the filter and filter it out (depending on the dryer, you may want to unscrew the filter first). Then, clean the lint that’s built up in the filter trap using a thin wand attachment on your vacuum cleaner.
  2. Vacuum the dust in the rear panel. Before you do this, be sure that you read the manufacturer’s instructions. Once you’re sure it is safe to wash the rear panel, then unscrew the bolts and you’ll see a ton of lint inside. Vacuum out the lint and use a brush for inside hard areas.
  3. Clean the lint in the drum. Wash the interior drum and the dryer door thoroughly with a sponge and a cleaner, and let it dry.
  4. Vacuum the duct. First, detach the lint duct at the rear of the dryer carefully and use your vacuum to remove the lint and dust within the duct. You also want to check the outside exhaust tube to ensure there is not any lint blocking the port. Eliminate the valve and vacuum cleaner the lint if there is any.
  5. Wipe down the dryer. Now it’s finally time to clean the outside surfaces of the drier with warm water and an all-purpose cleaner. After this is done, reattach the rear panel and ducts.

Clean your washing machine and dryer regularly to make them last longer, better protect your clothes, and avoid dangers, such as mold increase in the washer, washing machine overflows, and dryer fires.

Contact Your Local PuroClean Office To Get Disaster Restoration Services

For water removal services and fire damage restoration services, contact your local PuroClean Downey office. Our trained technicians use state-of-the-art equipment and methods to mitigate your property damage. Learn more right here.